The ground needs to be dry and flat and 4cm deep before you set the grids down for walking and vehicular traffic. Mole hills need slicing off and any existing mud needs to be scraped out before setting the grids in place. Hard core, soil and / or course sand can be used to pack to fill holes or dips. Fill the grids with sand, turf, 6-18mm stones or other suitable medium; just make sure it is packed tightly to the top of the grids and don't leave any grid edges sticking up. Whilst building your base, a plank across will help your knees and the grids!Set the base level with surrounding ground and fill the grids with gravel, soil and turf, course sand or other suitable medium; they will prevent the grass being ruined by vehicles, horses, other livestock, wheels and feet! You need 15k of gravel per grid. The grids keep gravel, sand and other fillers neat, tidy and flat. You will also be helping the environment by helping to prevent rain running off into the road where it can cause flooding.
As well as using recycled materials, these UK made grids help protect against flooding and rising damp. Rain drains through them into the sub soils and not onto roads. Used around and against the house and filled with stones, like a French drain effect, they help the water to drain down into the ground, not rise up the walls. Interlocking plastic grids provide level and stable ground.
Sheds, log cabins, summer houses, greenhouses, spas, field shelters. Other farm and garden buildings. Bases for sheds, greenhouses, log cabins and other garden buildings - basic instructions. Bases have been independently tested to destruction and strong enough to withstand over 150t per square metre, and come with a unique. To help protect your building from damp, rot or rust, simply lay your grids on a firm level base - on a lawn, concrete or bare ground, for example.
No need for a membrane under a building that has a floor, because weeds won't grow where there is no light. To prepare the area for your base, mole hills need slicing off and any existing mud needs to be scraped out before setting the grids in place. Erect your building on top of the base.
Fill any visible grids with stones for a attractive, professional finish or. Cut off any unwanted excess, with a jigsaw, as preferred.Use under decking, raised beds and other raised areas. ECO FRIENDLY GRIDS - specification.
Takes 150 tonnes load per square metre. Injection moulded - RECYCLED plastic & rubber mixed for incredible strength, durability and flexibility. Grids measure 50cm x 50cm x 4cm.
Heat and freeze tested - UV stable. This super eco friendly product simply locks into position with its own integrated lock-in clips. You simply lay them down in your own desired formation, size and shape.Cut to fit around awkward shapes. Fill with a suitable medium (not always necessary under garden buildings). Provide ground stability & support. And the clips just push-fit and clip together. Come complete with full instructions.
Home driveways and patio stability filled with gravel or grass etc. Tightly packed chipping or bark pathways etc.Embedded in earth landscaped areas and elevations in your garden. Trackways can then be walked over with no disruption to the surface. Suitable for paths for bikes, prams, mobility vehicles, and wheel chair friendly too. Emergency service (Fire Access routes).
Grass or gravel car parks or temporary over-spill. Driveways and residential lawn / gravel parking.
Horse stud and paddock use. School play area and access routes. Sales of this product go towards the care of retired and rescued horses, farm animals & birds. This item is in the category "Garden & Patio\Landscaping & Garden Materials\Ground Reinforcement".
The seller is "eco-grids" and is located in this country: GB. This item can be shipped to United Kingdom.